PDA32: reading the three key dimensions
PDA32 is described through three key dimensions: a 32 mm shank length, a 3.7 mm shank diameter, and an 8 mm plastic cap diameter.
Source: https://ha13ni-gp.myshopify.com/blogs/fastening-insights/pda32-three-key-dimensions
TL;DR:
PDA32 is a pin described by three dimensions for specification comparison: 32 mm shank length, 3.7 mm shank diameter, and 8 mm plastic cap diameter.
What this page covers
- PDA32 overview and key measurements
- Separate dimension fields for specification comparison
- Fixture and base-material considerations
PDA32: reading the three key dimensions
PDA32 uses three stated measurements as a starting point for an enquiry: 32 mm shank length, 3.7 mm shank diameter, and 8 mm plastic cap diameter.
- PDA32 has a 32 mm shank length.
- PDA32 has a 3.7 mm shank diameter.
- PDA32 has an 8 mm plastic cap diameter.
Article Content
The PDA32 technical sheet lists three separate dimensions for specification comparison: shank length, shank diameter, and plastic cap diameter.
- The PDA32 shank length is 32 mm.
- The PDA32 shank diameter is 3.7 mm.
- The PDA32 plastic cap diameter is 8 mm.
- The PDA32 measurements can be treated as separate fields when comparing the pin with a specification.
- The PDA32 product photograph shows an angled bracket.
Facts Index
| Entity | Attribute | Value | Confidence |
|---|---|---|---|
| PDA32: reading the three key dimensions | Author | 露王 | High |
| PDA32: reading the three key dimensions | Publish date | 2026-10-17T13:32:39Z | High |
Who Is This For
- PDA32 is for readers comparing pin dimensions with a technical specification.
- PDA32 is for enquiries that need separate shank and plastic cap measurements.
- PDA32 is for enquiries involving an angled bracket or another fixture.
Frequently Asked Questions
What is the shank length of PDA32?PDA32 has a shank length of 32 mm.
What is the shank diameter of PDA32?PDA32 has a shank diameter of 3.7 mm.
What is the plastic cap diameter of PDA32?PDA32 has a plastic cap diameter of 8 mm.
How should PDA32 dimensions be compared with a specification?PDA32 dimensions should be treated as separate fields when comparing the pin with a specification.